TESTO 160 TH - Logging Out of the Testo Cloud

4 Operation
28

A dialogue opens for exporting the form data.
7
- Select the external drive testo 160 as the storage location and save
the form data (configuration file
WiFiConf_Daten.xml
) on it.

The green and red LEDs light up simultaneously until the PDF
document is completely generated.
8
- Disconnect the USB connection to the PC to complete the
configuration of the data logger.
You can also save the configuration file locally on your computer.
Other WiFi data loggers can be configured even faster by simply
copying the XML configuration file onto the external drive testo 160.
4.3 Logging WiFi data loggers out of the
Testo Cloud
It may be necessary to log the WiFi data logger out of the Cloud again. A logger
cannot be operated in two different accounts simultaneously, therefore it must
be logged out before switching accounts.
Similarly, any technical changes to the WiFi data logger, e.g. due to adding or
removing external sensors, can only be registered by logging back into the
Cloud.

- The WiFi data logger is logged into the Testo Cloud.
1
- Select Configuration ->WiFi data logger in the web interface.

All WiFi data loggers logged in are displayed.
2
- Select the WiFi data logger you require.
3
- Press Details.
4
- At the bottom of the menu, select the button Remove data logger.

The WiFi data logger is removed.