TESTO 160 TH - Deleting an Area; Wifi Data Loggers

4 Operation
45
Setting Description
Area Area that the measuring point group
is to be allocated to.
Save
The settings can be saved.
Delete
The settings can be deleted.
4.10.7.2 Deleting an area
1
- Click on the "Actions” button.
2
- Click on the “Delete” button to delete the area.
4.10.8 WiFi data loggers
A summary of all logged on WiFi data loggers is displayed.
1
- Click on the “Details” button to display more information.
2
- Click on the “Deactivate” or “Activate” button to deactivate or
activate WiFi data loggers.
If a logger is deactivated, the measurement and alarm system are
switched off. The logger remains logged into the Cloud.
Configuring a WiFi data logger
1
- Click on the “Configure” button to change the configuration.
The following settings can be defined and edited:
Setting Description
Name of the WiFi data logger Designation of the WiFi data logger
(required field). Condition at delivery:
"Model_Serial number".
Description
Description of the WiFi data logger.
Select battery type Set the battery type used. For the
battery capacity to be displayed
correctly, the correct battery type
must be selected.
Display Switch the display of the WiFi data
logger on or off. (if present)
Name of the measuring point Specify the designation of the
measuring points.