TESTO 160 TH - Areas; Creating and Editing Areas

4 Operation
44
The following settings can be defined and edited:
Settings Description
Title Designation of the measuring point
group (required field).
Description Description of the measuring point
group.
Area Area that the measuring point group
is to be allocated to.
Measuring points Measuring points that are available
and those allocated to the measuring
point group are displayed. Click on
the
arrow
to allocate a measuring
point to the group. Click on the
cross
to delete a measuring point from the
group.
Save
The settings can be saved.
Delete
The settings can be deleted.
4.10.7 Areas
Measuring point groups can be organized into areas. Allocating measuring
point groups to an area (e.g. ground floor, first floor, etc.) makes the
administration of multiple measuring point groups easier.
4.10.7.1 Creating and editing areas
1
- Click on the “New area” button to create a new measuring point
group.

Areas already created are displayed in a list.
2
- Click on the "Actions” button and then “Edit”.

The settings are displayed and can be edited.
The following settings can be defined and edited:
Setting Description
Display name Designation of the area (required
field).
Description Description of the area.