TESTO 160 TH - User Settings; Account Information; Change Password; Logoff

4 Operation
43
4.10.4.1 User settings
The following user-specific settings can be made:
Setting Description
Language
Language of the user interface.
Time zone Time zone for the date and time
display.
Unit
Measurement parameters
Save
Settings can be saved.
4.10.4.2 Account information
Information about your testo 160 account is displayed.
4.10.4.3 Change password
1
- Enter the new password in both text fields ("New password" and
"New password (repeat)".
2
-
Click on the “Save” button to save the new password.
4.10.4.4 Logoff
1
- Click on the “Logoff” button to log off.
4.10.5 Account ID
The Account ID is the unique address of your user account in the Testo Cloud.
This is needed to configure the WiFi data loggers in order to ensure that they
send your data to the correct user account.
4.10.6 Creating and editing a measuring point group
Measuring points can be organized into measuring point groups. Allocating
measuring points to a measuring point group (e.g. Room 1, Room 2, etc.)
makes the administration of multiple measuring points easier.
For higher-level grouping, measuring point groups can be allocated to an area
(e.g. ground floor, first floor, etc.).
1
- Click on the “New measuring point group” button to create a new
measuring point group.

Measuring point groups that already exist are displayed in a list.