TESTO 160 TH - System Warnings; Creating and Displaying System Warnings; Configuring and Editing a Displayed System Warning

4 Operation
39
4.9 System warnings
4.9.1 Creating and displaying system warnings
1
-
Click on the "+ New system warning” button.

A new system warning is created.
Existing system warnings are displayed below the button.
1
-
Click on the title of a system warning.

An existing setting is displayed.
4.9.2 Configuring and editing a displayed system
warning
The following settings can be defined and edited.
Settings Description
Title Designation of the system warning
(required field)
Battery almost discharged Monitor the WiFi data logger for
discharged battery.
Power supply interrupted Monitor the external power supply of
the WiFi data logger for interruptions.
WiFi data logger is not responding Monitor the WiFi data logger for data
transmission failure. Click on the
“Activate” button and configure the
monitoring cycle using the slide
control. The set time should be
greater than the WiFi data logger's
communication cycle.
WiFi data logger WiFi data logger that needs to be
monitored. Click on the checkbox in
front of the WiFi data logger.