TESTO 160 TH - Page 40

4 Operation
38
Setting Description
Time control Define individual alarm periods for
which the alarm limit values 1 and 2,
or no alarm limit value at all, apply. To
define the alarm value 1 and 2,
double-click on a time point in the
table or pull open the desired time
period with the mouse. During
periods in which the table is left
empty, you receive no alarm. If you
have not defined alarm periods, the
alarm limits will be active 24 hours a
day.
If alarm periods have been defined,
the limit value alarms are active only
in the marked period.
Channel alarms Alarms in the event of a defective
sensor.
E-mail recipient Addressees who are informed when
an alarm occurs. Click on the
checkbox in front of the recipient or
enter the name and e-mail address of
other recipients and click on the
+ Add button.
SMS recipient Addressees who are informed when
an alarm occurs. Click on the
checkbox in front of the recipient or
enter the name and mobile phone
number of other recipients and click
on the + Add button.
Save
The settings are saved.
Delete
The alarm settings are deleted.