TESTO 160 TH - Firmware Updates

4 Operation
46
Setting Description
Measuring cycle Interval at which readings are
obtained. Set the measuring cycle
using the slide control.
Day communication cycle and
energy-saving mode
Interval at which readings are
transmitted to the Testo Cloud. Select
the start time for the day
communication cycle and the energy-
saving mode. Set the communication
cycle using the slide control.
Select unit Unit in which the readings are
displayed.
Save The settings can be saved.
Deactivate or Activate Measurement channels or WiFi data
loggers can be deactivated or
activated.
Remove The WiFi data loggers can be logged
off the system.
4.10.9 Firmware updates
A list of available firmware updates for the WiFi data loggers is displayed.
Firmware updates can be installed on the data loggers via WiFi.
1
- Click on the “Activate” button to install a firmware update, if this
update is available as an optional update. Otherwise, the button is
activated automatically.