TESTO 160 TH - Alarms and System Warnings

4 Operation
36
4.8 Alarms
With the testo Saveris 2 App, you can receive push alerts and you also get an
additional overview.
The Testo Saveris 2 App must be installed on your Android or iOS
device. You can get the App from the App Store for iOS devices or
from the Play Store for Android devices.
Push alerts will not be forwarded if your provider service is unavailable
or if the smartphone is switched off.
4.8.1 Alarm list
Display of alarms
A summary of all triggered alarms and system warnings is displayed. Unread
alarms and system warnings are shown in
bold.
The display can be filtered according to the following characteristics:
1
- Click on the checkbox in front of the measuring point
group/measuring point.

The alarms are sorted and displayed by measuring point
group/measuring point.
1.1
- Click on the start date/end date.
1.2
- Select the start date/start time or end date/end time.

The alarms are sorted and displayed by start or end date.
Detailed information on alarms
1
- Click on the arrow to open the tab and display more information.
On displaying the detailed information, the alarm message/system
warning is marked as "read" and the alarm counter is reduced.
1
- Click on the “Mark all as read” button.

All alarm messages are marked as “read”.