TESTO 160 TH - Page 20

3 Technical data
18
WiFi data loggers testo 160 TH testo 160 THE testo 160 THL
Security WPA2 Enterprise: EAP-TLS, EAP-TTLS-TLS, EAP-TTLS-
MSCHAPv2, EAP-TTLS-PSK, EAP-PEAP0-TLS, EAP-
PEAP0-MSCHAPv2, EAP-PEAP0-PSK, EAP-PEAP1-TLS,
EAP-PEAP1-MSCHAPv2, EAP-PEAP1-PSK;
WPA Personal, WPA2 (AES), WPA (TKIP), WEP
WiFi data
loggers
testo 160 IAQ testo 160 E
Order number
0572 2014
0572 2022
WLAN
Standard
802.11 b/g/n
Security
WPA2 Enterprise: EAP-TLS, EAP-TTLS-TLS, EAP-TTLS-
MSCHAPv2, EAP-TTLS-PSK, EAP-PEAP0-TLS, EAP-
PEAP0-MSCHAPv2, EAP-PEAP0-PSK, EAP-PEAP1-TLS,
EAP-PEAP1-MSCHAPv2, EAP-PEAP1-PSK;
WPA Personal, WPA2 (AES), WPA (TKIP), WEP
Technical data for a secure wireless LAN
Ports
The testo 160 WiFi data loggers use the MQTT protocol, which
communicates via port TCP 1883 and 8883.
These UDP port approvals are also required:
• Port 53 (DNS name resolution)
• Port 123 (NTP time synchronisation)
All ports only have to be able to communicate externally to the Cloud.
No bi-directional port approvals are necessary.
During the initial configuration, it is possible to select whether DHCP or
Static IP is used (select Expert mode for the corresponding
information).
(Not possible in the Setup assistant.)
testo 160 application
The testo 160 application is accessible via a normal, up-to-date
browser (www). The standard TCP ports http (80) and https (443) are
used.