Texas Instruments TI-89 Titanium User Manual

Sequence Graphing 359
Using a Sequence to Generate a Table
Previous sections described how to graph a sequence. You can also use a sequence to
generate a table. Refer to
Tables for detailed information.
Example: Fibonacci Sequence
In a Fibonacci sequence, the first two terms are 1 and 1. Each succeeding term is the
sum of the two immediately preceding terms.
1. On the Y= Editor (8#), define the
sequence and set the initial values as
shown.
2. Set table parameters (8&) to:
tblStart = 1
@tbl = 1
Independent = AUTO
You must enter {1,1},
although {1 1} is
shown in the
sequence list.
This item is dimmed
if you are not using
TIME axes.

Texas Instruments TI-89 Titanium Specifications

General

Display Type	LCD
Display Resolution	160 x 100 pixels
CPU	Motorola 68000
CPU Speed	16 MHz
RAM	256 KB
Flash ROM	2.7 MB
Programming Language	TI-BASIC, Assembly
Power Source	4 AAA batteries
Connectivity	I/O port
Dimensions	7.5 x 3.5 x 1 inches