Texas Instruments TI-89 Titanium User Manual

Statistics and Data Plots 539
• Execute a Graph command.
• Open a different variable in the Data/Matrix Editor.
Copying a Plot Definition
From
Plot Setup:
Note: If the original plot was selected (Ÿ), the copy is also selected.
Clearing a Plot Definition
From Plot Setup, highlight the plot and press …. To redefine an existing plot, you do not
necessarily need to clear it first; you can make changes to the existing definition. To
prevent a plot from graphing, you can deselect it.
Statistical Plot Types
When you define a plot as described in the previous section, the Plot Setup screen lets
you select the plot type. This section gives more information about the available plot
types.
1. Highlight the plot and press „.
2. Press B and select the plot number that
you want to copy to.
3. Press ¸.

Texas Instruments TI-89 Titanium Specifications

General

Display Type	LCD
Display Resolution	160 x 100 pixels
CPU	Motorola 68000
CPU Speed	16 MHz
RAM	256 KB
Flash ROM	2.7 MB
Programming Language	TI-BASIC, Assembly
Power Source	4 AAA batteries
Connectivity	I/O port
Dimensions	7.5 x 3.5 x 1 inches