Texas Instruments TI-89 Titanium User Manual

Tables 444
•Set Graph < - > Table and Independent by using the setTable function. Refer to the
Technical Reference module.
Displaying an Automatic Table
If Independent = AUTO on the TABLE SETUP dialog box, a table is generated
automatically when you display the Table screen. If Graph < - >Table
=ON, the table
matches the trace values from the Graph screen. If Graph < - >Table
=OFF, the table is
based on the values you entered for
tblStart and @tbl.
Before You Begin
Define and select the applicable functions on the Y= Editor (¹#). This example uses
y1(x) = x
3
Nx/3.
Displaying the Table Screen
To display the Table screen, press ¹' or O
5.
The cursor initially highlights the cell that contains the starting value of the independent
variable. You can move the cursor to any cell that contains a value.
Then enter the initial table parameters
(¹&).

Texas Instruments TI-89 Titanium Specifications

General

Display Type	LCD
Display Resolution	160 x 100 pixels
CPU	Motorola 68000
CPU Speed	16 MHz
RAM	256 KB
Flash ROM	2.7 MB
Programming Language	TI-BASIC, Assembly
Power Source	4 AAA batteries
Connectivity	I/O port
Dimensions	7.5 x 3.5 x 1 inches