Texas Instruments TI-89 Titanium User Manual

Operating the Calculator 153
TI-89 Titanium
Stopping a Calculation
When a calculation is in progress, BUSY appears on the right end of the status line. To
stop the calculation, press ´.
Formats of Displayed Results
A result may be calculated and displayed in any of several formats. This section
describes the modes and their settings that affect the display formats. You can check or
change your current mode settings.
Press Display
3.76 e c · 7.9 «
2 ]
5 d d
¸
«
2 2 ™ LOG
j c 45 d
¸
There may be a delay before the Break
message is displayed.
Press N to return to the current application.
When you press «, the
entry line is replaced with
the variable ans(1), which
contains the last answer.

Texas Instruments TI-89 Titanium Specifications

General

Display Type	LCD
Display Resolution	160 x 100 pixels
CPU	Motorola 68000
CPU Speed	16 MHz
RAM	256 KB
Flash ROM	2.7 MB
Programming Language	TI-BASIC, Assembly
Power Source	4 AAA batteries
Connectivity	I/O port
Dimensions	7.5 x 3.5 x 1 inches