Number Bases 670
Note: If you enter an integer that is too large to be stored in a signed, 32-bit binary form,
a symmetric modulo operation brings the value into the range.
The result is displayed according to the Base mode.
Rotating and Shifting Bits
Function with syntax Description
rotate(integer)
– or –
rotate(integer,#ofRotations)
If #ofRotations is:
• omitted — bits rotate once to the right
(default is
L1).
• negative — bits rotate the specified
number of times to the right.
• positive — bits rotate the specified number
of times to the left.
In a right rotation, the rightmost bit rotates to
the leftmost bit; vice versa for a left rotation.
0h7AC36 =
and
0h3D5F
0b00000000000001111010110000110110
and
0b00000000000000000011110101011111
0b00000000000000000010110000010110 = 0h2C16
Leading zeros are not shown in the result.
To Next Page
Loading...
