Texecom Premier 8XP-W - Page 17

Premier 8XP-W & 32XP-W Installation Manual
17
Premier SmartKey™ are assigned to users as follows:
1. Select engineer’s mode by entering the engineer code followed by / then .
2. Enter  to select the Program Users menu.
3. Enter the two digit user number that you want to assign the Premier SmartKey™ to e.g.,
.
4. Press the / key, if an error tone is generated then the receiver is not installed or
configured correctly (see Receiver Installation above).
5. Press the power button on the Premier SmartKey™, the panel will generate an
acceptance tone and the Premier SmartKey™ is now assigned to the selected user.
6. If required, a user access code can also be assigned to user in the normal way.
 
   
  
  

Enter User
Number

  
  
Enter Engineers code
Then press then
/

 
Acceptance Tone
from Panel 
/

  
 