Texecom Premier 8XP-W - Arm Fail Indication

Premier 8XP-W & 32XP-W Installation Manual
37
(hold 2 secs)
POWER
ARM
DIS ARM
PART ARM
Alarm status LED’s
S martK ey s tatus L E D
DIS ARME D
PART ARMED
ARMED
Arm Fail Indication
If the system or any area assigned to a user fails to arm, all three alarm status LED’s will flash to
indicate an arm failure. In the case of users assigned to multiple areas the whole system should be
unset and each area investigated to determine the cause of the arm failure.