Texecom Premier Elite 8XP-W - Change Device Attributes; Attribute Change Limitation; Saving Device Attribute Changes; Device Attributes Flowchart

Premier Elite 8XP-W & 32XP-W Installation Manual
34 INS467-4
3. Change Device attributes
 Not available on Ricochet MT2 systems
Device attribute changes should be saved by either pressing the / key after each device
change, or by pressing the / key after scrolling through the devices and making multiple
changes.
Once changed device attributes will be updated on the next successful poll with the receiver, if
however you wish to update the devices immediately please see Update Devices on page 36.
 
 
    
 
  
 
Use 1 & 2 keys to change device att ributes
1 = AUTO MODE (Default)
2 = ALWAYS AWAKE
  
 
    
  
    
 

/


/



/


/

/

