Texecom Premier Elite 8XP-W - Change SmartKey Attributes; SmartKey Attribute Change Limitation; Saving SmartKey Attribute Changes; SmartKey Attribute Update

Premier Elite 8XP-W & 32XP-W Installation Manual
INS467-4 35
4. Change SmartKey™ attributes
 Not available on Ricochet MT2 Systems
SmartKey™ attribute changes should be saved by either pressing the  key after each
SmartKey™ change, or by pressing the  key after scrolling through the devices and making
multiple changes.
 
 
   
  
  
   
Use 1 & 2 keys t o change fob att ribut es
1 = LED On/Off (Default is On)
2 = Aux Off/On (Default is Off)
*Smart Key attribut es will be updated the
next t ime the fob is powered up.
  
   

/


/



/


/

Once changed Premier Elite SmartKey™ attributes will be updated the next time the Premier
Elite SmartKey™ is powered on; if however you wish to update the devices immediately
please see Update Devices on page 36
5. / Key Functions
When in Commission Mode (page 44) pressing the / key will display further
information about the device’s routing information and signal strength.
No Hops
In this example the device is “Home Running”
 
  
1 Hop
In this example the device is hopping through device
16 and the relevant signal strengths are shown
 
 