24
TEXI Catenaccio operation manual
6. Press and to set the P3 as the third
pattern in C1. User can select P pattern from P1~P50
with & .
7. Press to end the storage.
8. Press to end the storage mode of combined
pattern.
9. Press to end the Mode Setting and return to the
ordinary mode.
(2). Sewing Operation
Example: Sew the C1 pattern.
1. Power on the machine
2. Set the pattern number as C1.1 with & .
3. Press to turn on the Sewing LED. After that the pres-
ser will go up.
4. If the pattern shape is sound, the sewing operation will proceed.
5. Sew the C1 pattern in the sequence in the combination. When
the last pattern in the combination is finished, the machine will start
sewing the first pattern and repeat this combination.
After the sewing, if user wants to go to the previous pattern or the next pattern, user can press & when
the Sewing LED is on. Then the pattern display will be changed and the presser will also move to the start point
After storing the patterns among C1～C20, if the P pattern in P1~P50 id changed, the content of P pattern with same code
will also be changed.
Confirmation of pattern is necessary for each pattern.
To Next Page
Loading...
Need help?
General
