Texi Catenaccio - Specifications

5
TEXI Catenaccio operation manual
EXPLANATION OF TEXI COMPUTER-CONTROLLED HIGHSPEED BARTACKING MACHINE
［1］SPECIFICATIONS
1. Sewing area： X (lateral) direction 40 mm
Y (longitudinal) direction30 mm
2. Max. sewing speed： 3000 rpm
(when sewing pitches are less than 5mm in X-direction and 3.5mm in Y-direction)
3. Stitch length： 0.1-10 mm (adjustable in 0.1 mm step)
4. Feed motion of work clamp foot： Intermittent feed (2-shaft drive by stepping motor)
5. Needle bar stroke： 1.2mm
6. Needle： DPX5 (135x5) DPX17 (135X17)
7. Lift of work clamp foot： 13 mm (standard) Max.17 mm
8. Shuttle： standard semi-rotary hook （oil wick lubrication）
9. lubricating： oil 10# (supplied by oiler)
10. Date recoring： EPROM
11. Enlarging/Reducing facility： 20% to 200% (1% step) in X-direction and Y-direction respectively
12. Enlarging/Reducing： Patten enlargement/reduction can be done by increasing/decreasing the stitch
length
13. Max. Sewing speed limitation： 400 to 3000 rpm（100 rpm）
14. Pattern selection： Specifying pattern No.type（1 to 200）
15. Bobbin thread counter： UP/DOWN taye（0-9999）
16. Sewing machine motor： Servo motor
17. Dimensions： W：1200 mm L：540 mm H：1100 mm
18. Weight： Machine head 50 Kg Control box 6 Kg
19. Power consumption： 0.6KW
20. Operating temperature range： 5°C to 35°C
21. Operating humidity range： 5% to 85%（No dew condensation）
22. Line voltage： Rated voltage ±10% 50-60Hz