TK 56704-1-OP-EN
71
The Turn Off/Turn On CYCLE-SENTRY screen will appear. In the display
shown (Figure 82, p. 71), the unit is operating in CYCLE-SENTRY mode.
Turning CYCLE-SENTRY mode off will result in the unit running in
Continuous mode.
Figure 82. Turn Off/Turn On CYCLE-SENTRY Screen
Pressing the Select key will change the mode from CYCLE-SENTRY to
Continuous.
Figure 83. Select Key
The display will confirm the change as shown (Figure 84, p. 71).
Figure 84. Programming Screen
OOppeerraattiinngg IInnssttrruuccttiioonnss ffoorr PPrreemmiiuumm HHMMII CCoonnttrrooll PPaanneell
To Next Page
Loading...
Need help?
General
