80
TK 56704-1-OP-EN
The display will now prompt the operator for the MINUTE the unit is to
restart in normal operation. In the example shown (Figure 105, p. 80), 4:30
am has been chosen. Press the YES key to confirm the MINUTE.
Figure 105. Confirm Minute
The display will now prompt for a Pretrip Test on Wake-up. Press the YES
key to perform a Pretrip Test on Wake-up. If the No key is pressed, the unit
will resume normal operation on Wake-up.
Figure 106. Press Yes Key for Pretrip Test
The display will show SLEEP and the unit will start and stop as required to
keep the engine warm and/or the battery charged.
NNoottee:: The unit may start when sleep is enabled to bring battery charge level
and engine temperature up to minimum level. It will shut down and
then maintain minimum levels.
OOppeerraattiinngg IInnssttrruuccttiioonnss ffoorr PPrreemmiiuumm HHMMII CCoonnttrrooll PPaanneell
To Next Page
Loading...
Need help?
General
