2-42
DRIVE MOTOR 2.11
C3542
C3540
C3541
C3543
Assembly
9 Gear-roller stage of motor.
Timing is important to ensure oil pressure/flow enters the
correct chamber for proper drive/rotation. (fig. C3540)
12 Use securing ring and install onto grove on channel
plate (fig. C3543).
11 Install guide pins on gearwheel (3) and fix channel
plate onto gearwheer (fig. C3542)
10 When preparing for timing, marker valley to valley
in any location on shaft as shown (fig. C3541).
Front cover
NOTE: The fibre plates are also called outer plates
due to the “teeth” outside of the plate.
IMPORTANT
To Next Page
Loading...
