3-2
SPECIFICATIONS & MAINTENANCE 3.1
Chain Size ............................................................................................. ANSI 100
Approved Chain Manufacturer................................................................. Tsubaki
Lubricating Oil....................................................... 10W30 API Classification SJ
Oil Capacity (each)................................................................. 17 Liters. (4.5 gal)
Torque Specifications:
Motor Sprocket Bolt ................................................................. 25 lbs /ft (34 nm)
Wheel Nuts......................................................... 100 - 110 lbs /ft (135 - 149 nm)
Tire Pressure............................................................................... 50 psi (345 Kpa)
Specifications
Maintenance Initial Check (hrs) Check Every (hrs)
Tire Pressure ...................................... 8 ......................................................... 8
Wheel Nut Torque.............................. 8 ......................................................... 8
Lubrication Oil.................................. 50 ....................................................150 (*)
Motor Mounting Nuts....................... 50 ...................................................... 150
Axle Bearing Pre-load ...................... 50 ...................................................... 150
(*) Change every 1000 hours.
To Next Page
Loading...
Need help?
General
