THOMSON THS210 - Quick Guide for Using Your Receiver; Operation; Changing Channels

11
English
5.0 QUICK GUIDE FOR USING YOUR RECEIVER
We understand that you can’t wait to enjoy your new HD receiver. The following quick guide will
make you familiar with the basic operation of this device. We do, however, advice you to read
the full manual to get the best performance from your THOMSON HD receiver.
To turn your receiver ON or to Standby, press q on the remote control.
Choose channels with p/q. Alternatively, you can also enter the channel number with the 0~9
buttons on the remote control or press OK in viewing mode to display the channel list.
The volume can be adjusted with tu.
6.0 OPERATION
In viewing mode, several features are available to make watching TV a true pleasure. This
paragraph describes these features. Please also read chapter 7 to get familiar with the menu of
your new receiver.
6.1 Changing channels
There are dierent ways to change channels with your new receiver.
- Via direct access
- Via the channel list
- Via the p/q buttons
- Via the 9 button
6.1.1 Direct access
To gain direct access to a certain channel, simply enter its number with the 0~9 keys on the
remote control. Channel numbers can be up to four digits long. Entering a number with less
than four digits is possible. Just wait a few seconds and your receiver will switch to the selected
channel.
6.1.2 Channel list
Press OK in viewing mode to display the channel list. Use p/q to highlight your channel of
choice and press OK once to select the highlighted channel. The channel list is equipped with a
Find function to make it easier to nd channels. In the channel list, press RED and an alphabet
banner will be displayed. Use p/q tu to select the rst letter (or letters) of your channel of
choice and select OK to conrm or just press . All channels beginning with the chosen letter(s)
will now be displayed. Select the channel in the ltered list.
The following buttons are available in the channel list and in viewing mode:
RED: Opens an alphabet banner to quickly nd a channel
TV/R: Toggles between TV and radio channels
4 Opens the Satellite List for satellite selection
6.1.3 Using the p/q buttons
p will switch to a higher channel.