29
English
PROBLEM POSSIBLE CAUSE WHAT TO DO
Scrambled channel
message
The channel is scrambled. Select an alternative channel.
No response to remote
control
The receiver is o. Plug in and turn on the plug.
The handset is not aimed
correctly.
Aim the handset at the IR
sensor.
The IR sensor is obstructed. Check for obstructions.
The handset batteries are
exhausted.
Replace the handset batteries.
Password forgotten The default password is
0000
Contact the local Service
Hotline or send an email
to our support via
www.thomsonstb.net.
The external USB HDD does
not start.
The power consumption is
too high.
Connect an extra power supply
adapter to your USB HDD
device.
The receiver switches to
standby automatically.
The Auto Standby function
is activated and has reached
the set time (default 3h).
Set the power down time or
disable it in the System Auto
Standby menu .
9.0 SPECIFICATIONS
Demodulator
Demodulation: QPSK, 8PSK
Input symbol rate: DVB-S2 8PSK/QPSK: 10~30 Ms/s
FEC decoder: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 in DVB-S2
mode
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 in 8PSK mode
Video Decoder
Prole level: MP@HL, MPEG-4 H.264/AVC
Input rate: Max. 20 Mbit/s
To Next Page
Loading...
