THOMSON THS210 - System Settings

22
NOTE: If there are timers running, the auto standby function will be
disabled for the booked time.
Timer Enter to the timer (schedule) function. Please refer to section 7.4.2
for details.
Daylight Saving Time Select On or O depending on the year’s period.
7.4.1 Timer (Schedule)
In this menu you can setup the schedule for automatic switching to the dened channels at a
particular date/time. The timer menu can be entered directly from viewing mode by pressing
the BLUE button.
Add: Press RED to add a new booking. In the appearing dialog select
channel type and number, the starting date and time, end time,
repeat cycle (once, daily or weekly). Tip: For selecting the channel
number you can use the tu.
When you have entered all parameters, press OK to store your
booking.
Edit: Press the GREEN button to edit an existing booking.
Delete: Press the BLUE button to delete a booking from the list. Press OK to
conrm deleting or  to cancel.
NOTE You can set timers for programmes directly from the EPG. Please
refer to section 6.8 for more details.
7.5 Option
Press MENU and select Option. In this menu you can adjust the OSD Language, Subtitle
Language, Audio Language, Digital Audio mode.
Select an option and press tu to adjust the setting. Press  to exit the menu.
OSD Language: Select the preferred language for the On Screen Display.
Subtitle Language: Select the preferred subtitle language.
Audio Language: Select the preferred audio language for watching TV channels. If the
language is not available, the default programme language will be
used
Digital Audio: Select digital audio output mode. Settings aect both S/PDIF and
HDMI outputs.
PCM – audio from any format will be converted to PCM format
RAW – audio from receiver will be send in original format
RAW (HDMI On)- As RAW, but also aects the HDMI output.
OFF – digital audio output disabled
7.6 System Settings
Press MENU and select System. The menu provides options to adjust the system settings.