26
Tuning the TileVision
®
Satellite
Select Satellite source see page 24
1
Press the MENU button. The CHANNEL menu will be displayed.
2
Press the 56 buttons to highlight Dish Setup.
3
Press the OK button to display the Dish Setup menu.
4
Press the 56 buttons to highlight the required satellite. For UK Free To Air channels, select the satellite
marked Ku_TileVision (No 59).
5
Press the OK button, a RED tick will be placed by the side to indicate the satellite has been selected..
6
Press the 4 button to edit the satellite settings menu.
6a
Press the 56 buttons to highlight the setting to be adjusted.
LNB Type. Press the OK button to display the list of available options. Press 56 buttons
to highlight correct value. Press the OK button to set the value.
Recommended 09750/10750
6b
Press the 34 buttons to set the correct value for:
Recommended
LNB Power 13/18 V
22KHz Auto
ToneBurst None
DiSEqC1.0 None
DiSEqC1.1 None
Motor None
7
Press the BLUE button, the Channel Search menu will be displayed.
Refer to page 27 to set up the Channel Search options.
To Next Page
Loading...
