TileVision 22 - Signal Information; CI Information

34
Signal Information
Signal information is only available when DTV is being viewed. The information detailed is regarding the
multiplex currently being viewed.
1 Press the MENU button to display the CHANNEL menu.
2 Press the 56 buttons to HIGHLIGHT the S IGNAL INFORMATION menu.
3 Press the OK button to display the signal information.
4 Press the MENU button to return to the CHANNEL menu.
CI Information
If a Conditional Access Module (CAM) is installed CI information is available via the CHANNEL menu as follows:
Note: If a Conditional Access Module (CAM) is not installed the option CI Information will be greyed out and not
selectable.
1 Press the MENU button to display the CHANNEL menu.
2 Press the 56 buttons to HIGHLIGHT the CI INFORMATION menu.
3 Press the OK button to display the CI Information
With a CAM installed the message ‘Loading CI MMI...’ will be displayed whilst the TileVision
®
accesses the
information from the CAM and viewing card.
4 When the Main menu is displayed,
4a Press the 56 buttons to select a menu option
4b Press the OK button to view the available information.
4c Press the OK or EXIT button to return to the main CI Information menu.
5 Press the EXIT button to close the menu.
LCN (Logical Channel Number) Sorting
1 Press the MENU button to display CHANNEL menu.
3 Press the 56 buttons to highlight LCN SORTING.
4 Press the OK button to toggle the setting between ON and OFF.
5 Press the MENU button to exit the CHANNEL menu.