TileVision 22 - Language Selection

54
On Screen Display Language
The on-screen menus and lists can be in any of the following twenty two languages: Český, Dansk, Deutsch,
English, Español, Ελληνικά, Français, Hrvatski, Italiano, Magyar, Nederlands, Norsk, Polski, Portugês,
Pyccкий, Româneste, Slovenščina, Srpski, Suomi, Svenska, Български, Slovak.
1 Press the MENU button.
2 Press the 34 buttons to display the OPTION menu.
3 Press the 56 button to highlight OSD LANGUAGE.
4 Press the OK button to display the OSD LANGUAGE selection menu.
3 Press the 56 and 34 buttons until the required language is selected.
4 Press the MENU button to close the OSD LANGUAGE menu.
All the on-screen displays will now be in the chosen language.
The primary or secondary language are used as appropriate if they are available when a multiple language
source is broadcast.
Set the preferred audio languages as follows:
1 Press the MENU button.
2 Press the 34 buttons to display the OPTION menu.
3 Press the 56 buttons twice to HIGHLIGHT the AUDIO LANGUAGES menu.
4 Press the OK button to display the AUDIO LANGUAGES selection menu.
5 Press the 34 buttons to display PRIMARY or SECONDARY.
6 Press the 6 button to move to the language selection area.
7 Press the 56 and 34 buttons to select the required language.
8 Press the MENU button to return to the AUDIO LANGUAGES (top) selection menu.
8a Repeat from instruction 5 to set a SECONDARY language.
9 Press the MENU button to exit the AUDIO LANGUAGES selection menu.
Audio Language