38
The EPG Timer Recording
The Electronic Programme Guide is only available when viewing Digital TV or Satellite TV.
A USB memory stick (flash drive) must be installed.
To record a program from the EPG.
1
Press the EPG button. The EPG will be displayed with the current channel being viewed, highlighted.
2
Press the 5 button to highlight the Date Time Bar (at the top of the EPG listing). For a fast scroll up the
EPG list press the Page Up button.
3
Press the 34 buttons to set the required date, the date can be set within the next seven days from the
current date.
4
Press the 5 button to highlight Programme Guide Time.
5
Press the 34 buttons to change the Programme Guide Time to Programme Guide Channel.
6
Press the 6 button to highlight Channel Select.
7
Press the 34 buttons to select the required channel.
8
Press the 56 buttons to highlight the required programme and time.
9
Press the RED button.
10
The RECORDER settings will be displayed.
11
Press the OK button.
12
The Timer Confirmed notification will be displayed.
If a programme recording time conflicts with another recording the Timer Confirmation notice will
advise a Timer Overlap and the current setting will be deleted. The timer recording will not be set.
Timer Recording - Indication.
With the TileVision in standby mode (red LED lit). The LED will change to green to indicate
that the recording is in progress, a picture will NOT be displayed. On completion of the
recording the LED will revert back to red.
To Next Page
Loading...
