EasyManua.ls Logo

TileVision 22 - Subtitles

TileVision 22
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Noise Reduction can be independently set for each input except PC RGB where Noise Reduction
setting is not required.
If noise reduction is needed, Default is the recommended setting.
Noise reduction can be set as follows:
1
Press the MENU button.
2
Press the 34 buttons to select the PICTURE menu.
3
Press the 56 buttons to highlight
Noise Reduction.
4
Press the OK button to display Noise Reduction menu.
5
Press the 56 buttons to select the required settings.
Off, Low, Middle, High or Default.
6
Press the Menu button to close the Noise Reduction menu.
Subtitles
Most DTV broadcasts include subtitles in at least one language. To select
subtitles or turn subtitles off press the SUBTITLES button and the
Subtitle
Languages
list will be displayed.
Press the 56 buttons to select a language or turn Subtitles off and press the
OK button to save settings and close the list.
Picture Noise Reduction
Sound Mute
The sound can be muted by pressing the
MUTE
button.
The mute flag will be displayed on the screen whenever the sound is muted.
To restore the sound to the previous level press the
MUTE
button or press either VOLUME button up or
down.
Subtitles
Sound - Mute

Table of Contents

Related product manuals