EasyManua.ls Logo

TileVision 22 - Restore Default; On Screen Display (OSD) Time

TileVision 22
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57
Restore Default
There is normally no need to restore factory settings. It can however, be useful to restore factory settings as an
easy way of clearing such restrictions as blocked, skipped channels and personal settings, etc.
The default factory settings can be restored as follows:
1
Press the MENU button.
2
Press the 34 buttons to display the OPTION menu.
3
Press the 56 buttons to highlight the RESTORE DEFAULT option.
4
Press the
OK
button to display the WARNING menu.
5
Press the 3 button to select YES and restore all setting.
5a
Press the 4 button to select NO and return to the OPTION menu.
Restore default does not:
Restore the password to the original default code of 0000.
Set the LOCK to off.
Remove the age restriction set with parental guidance.
1
Press the MENU button.
2
Press the 34 buttons to display the OPTION menu.
3
Press the 56 buttons to highlight the OSD TIME menu.
4
Press the
OK
button to display the OSD TIME menu.
5
Press the 56 buttons to select the required delay, 15 seconds, 30 seconds or 60 seconds.
6
Press the MENU button to close the OSD TIME menu.
OSD (On Screen Display) Time

Table of Contents

Related product manuals