59
Change Password
1
Press the MENU button.
2
Press the 34 buttons to display the LOCK menu.
3
Press the 56 buttons to highlight the SET PASSWORD option.
4
Press the OK button to open the password window.
5
Enter the current four digit code using the number pad on the remote control.
6
Enter the NEW four digit code using the number pad on the remote control.
7
Reenter the NEW four digit code using the number pad on the remote control.
When completed the display will return to the LOCK menu.
If the default password of 0000 is replaced by a user password and the password
is then forgotten, contact the place of purchase to obtain the master password.
Blocked programmes can only be viewed by entering the password. The programmes are selected in the
normal way but it is necessary to enter the password before the programme is shown.
Programmes are blocked as follows:
1
UNLOCK the LOCK MENU screen, see page 58.
2
Press the 56 buttons to highlight the BLOCK PROGRAM menu.
3
Press the
OK
button to display a list of all the programs
4
Press the 56 buttons to select
the required Programme
.
5
Press the GREEN button to BLOCK the selected programme. A padlock symbol will appear next to the
blocked programme.
5a
To UNBLOCK a blocked programme press the GREEN button.
4
Press the
MENU
button to return from the BLOCK PROGRAMME menu.
Block Programme
To Next Page
Loading...
