Settings - tap this button to configure the source for the GPS signal, change the message
settings and select warning sounds.
WORK settings
In the WORK menu, there is a Settings menu.
Use the Settings menu to do the following:
If you are using your PRO together with a LINK, choose to use the GPS signal either from your
TomTom navigation device or from your LINK.
Important: Make sure the GPS source you select has a clear view of the sky. This is needed for
good GPS reception.
Select to read aloud incoming orders and WEBFLEET messages automatically.
Select a warning sound for dangerous driving and for idling.
Adjust odometer
When you use the logbook you need to synchronise the odometer on your TomTom PRO with
your vehicle’s odometer.
1. Tap the screen to bring up the main menu.
2. Tap WORK.
3. Tap Set odometer.
4. Tap the buttons to adjust the odometer to match your vehicle's odometer.
To Next Page
Loading...
Need help?
General
