TomTom PRO Reference Guide

20
Planning a route
Important: In the interest of safety and to reduce distractions while you are driving, you should
always plan a route before you start driving.
To plan a route on your TomTom PRO device, do the following:
1. Tap the screen to open the Main Menu.
2. Tap Navigate to or Drive to.
3. Tap Address.
You can change the country or state setting by tapping the flag before you select a city.
4. Enter the town or city name, or the postcode.
Tip: If your device supports voice control, instead of typing the address, tap the microphone
button to enter the address by speaking to your PRO device.
Towns with similar names are shown in the list while you type.
When the correct city or town appears in the list, tap the name to select the destination.
Planning a route

TomTom PRO Specifications

General

Category	GPS
Display Resolution	480 x 272 pixels
Touchscreen	Yes
Wi-Fi	No
GPS Receiver	Yes
Lane Guidance	Yes
Speed Camera Alerts	Yes
Connectivity	Bluetooth
Expandable Memory	SD card slot
Preloaded Maps	Yes
Processor	Unknown