Press the key. A single "pip" sounds.
The time display begins to ash.
Turn the Jog Dial to set a desired spinning time.
<
To set the spinning time
>
①
②
※
Time setting range : 1 to 99 minutes and continuous run operation
Above 99 minutes, it becomes continuous run operation and the display indicates
"F.-.".
After setting the time, leave it for approximately two seconds to nalize the setting.
③
TIME
The soft brake function provides the natural deceleration at the speed between 500rpm and 0rpm.
Press the key. A single "pip" sounds.
The soft brake lamp lights up to indicate the soft brake function is selected.
<
To select the soft brake
>
①
※
If the soft brake lamp lights up after turning on the power, it indicates that the soft brake function was
selected during the last operation.
SOFT BRAKE
※
If the soft brake key is pressed while the soft brake indicator lamp is on, the soft brake setting is
released.
To Next Page
Loading...
