7-8.
ECO Mode Shift Time Setting (F7)
This function allows setting the power saving (ECO) mode shift time.
※
Factory default value is “30”.
Set value [min] Description
1
〜
240 The ECO mode shift time can be set from 1 to 240 minutes.
7-9.
Displaying the Total Time of the Run(d0)
This function allows displaying the total time of the run, but it is only available for inspection
and the number displayed cannot be changed.
When selecting the function code number “d0”,
the total time of the run is displayed on the
control panel.
When pressing the key repeatedly,
the Speed/RCF and Time displays toggle back
and forth between time calculations for hours
with 5 digits and minutes with 2 digits.
(e.g., the total time of the run is displayed
as 134 hours and 56 minutes.)
START
Press the START key
to switch the display
between hour and
minute.
7-10.
Displaying the Total Count of the Run(d1)
This function allows displaying the total count of the run, but it is only available for inspection
and the number displayed cannot be changed.
When selecting the function code number “d1”,
the Speed/RCF and Time displays show the
total count of the run with 5 digits.
(e.g., the total count of the run is
displayed as 123 counts.)
To Next Page
Loading...
