8-3. Monthly Maintenance
Avoid touching sharp edges on the heat exchanger.
●
Otherwise, it may cause an injury.
Drain dew condensation water out from the chamber. (See "8-1.Cleaning and Disinfection the
Main Unit" in this Operator's Manual.)
Wipe the interior with a soft cloth moistened with a neutral detergent.
1.Rotors, buckets and racks
①
②
Wipe away any detergent residue using a cloth dipped in clear water and squeezed almost dry.
③
※
Perform cleaning referring to "8-2. Cleaning and Disinfecting the Rotor".
To keep the MX-307, 207 and 107 in good operating order, perform cleaning and inspection monthly
according to the following procedure:
<
To clean the unit
>
2.Chamber interior
※
Be careful not to bend the temperature sensor. It may cause malfunction.
Wipe the motor shaft with a soft cloth moistened with a neutral detergent.
Apply commercially available machine oil to the motor shaft for rust prevention and wipe away
excess oil with a soft cloth.
①
②
3.Motor shaft
To Next Page
Loading...
