Tomy MX-307 - 7. FUNCTION(FUNC) KEY; 7-1. Setting the Rotational Radius(F0)

— 43 —
7. FUNCTION(FUNC) KEY
The MX-307, 207 and 107 are designed that the key provides functions and settings
which are not available on the control panel in the normal mode. While the indicator lamp on
the key is illuminating, each display on the control panel shows information in some
special mode.
FUNC
Function Code
(Temperature display)
Description Time display
F0 Setting of the rotational radius
mm
F1 Setting of the adaptive speed in the Soft Brake mode
Sb
F2 Selecting of the Flash mode pattern
FL
F3 Setting of the speed in the Flash mode
FS
F4 Setting of the buzzer type
bP
F5 Setting of the buzzer time
BL
F6 Setting of the lid-up monitoring time
dr
F7 Setting of the ECO mode shift time
Ec
d0 Display of the total time of the run
-
d1 Display of the total count of the run
-
FUNC
Hold down the key for at least two seconds , the indicator lamp on the function key
lights up.
Turn the Jog Dial to display the desired code number.
Press the key. The Speed/RCF display begins to ash.
Turn the Jog Dial to display the desired set value.
①
②
③
④
<
To perform function key
>
※
For detailed information on how to execute the function of each code number, please refer to a specic
instruction stated in this Manual.
Hold down the key for at least two seconds. A beep sounds and the setting is
completed.
Press the key. The indicator lamp on the function key goes out.
⑤
⑥
FUNC
START
START
FUNC