6. USEFUL FUNCTIONS
6-1.
Checking Operating Conditions during the Run
Each set parameter of operating conditions can be checked at any time during the run.
Press the setting key of an operating parameter to be checked. The current set value will
appear and ash on the display.
Leave it for approximately two seconds. The display will return to the actual value.
①
②
<
To check the set temperature, speed and run time
>
The soft brake indicator lamp is illuminating while the soft brake function is activated.
<
To check that the soft brake is selected
>
6-2.
Changing Operating Conditions during the Run
Each setting of operating conditions can be changed at any time during the run.
※
When the operation is completed after the change, the newly set parameters are stored in the memory
and will appear in the display at the next use.
Press the setting key of the operating parameter to be changed.
The current set value will appear and ash in the display.
Turn the Jog Dial to set to a desired value.
After changing the setting, leave it for approximately two seconds to nalize the revised
setting.
①
②
③
<
To change the set temperature, speed and run time
>
Press the key to select or release the soft brake setting.
<
To change the soft brake
>
SOFT BRAKE
To Next Page
Loading...
