Tomy MX-307 - Page 71

— 70 —
Rack
Tubes
Actual
capacity
［ml］
Max.
capacity
Number of
tubes ×
places
Max.
allowable
speed
［rpm］
Max.RCF
［G］
（radius:mm）
Rem
a
rk s
Nominal
capacity
［ml］
Mfr. Model Name
Size
［φ×L mm］
M ater ial
S
B
h
o
a
t
p
t
e
o
m
Max.
allowable
RCF
［G］
AR510-04
50
COR
430291
29×116
PP
C
15,500
35
4
15,000 20,380
（
81
） ※5
430304 PET 3,600 6,300 3,600
（
81
）
430829
PP
15,500
15,000 20,380
（
81
）
※5
FLC
352098
30×115 9,400 352070
352077
※6
IWA 2343-050 29×117 9,400
NUC
339652 30×115 17,000
※7
362696
26.6×
113.7
9,500
※5
SUM MS-56500 30×115 9,400
INA
3182-345
29×115 15,000
3181-345
35 NAL
3148-0050
28.6×
113.8
PPCO
50,000 24.5 15,000 20,380
（
81
）
3146-0050
28.8×
114.1
PC
15
COR
430766
16×120 PP 12,000
10.5
15,000 20,380
（
81
） ※6
430791
FLC 352196 17×120 PP 6,000 15,000 20,380
（
81
） ※7
COR 430053 16×120 PET 3,600 6,300 3,600
（
81
）
FLC 352095 17×120 PS 1,800 4,400 1,750
（
81
）
NUC 339650 17×120
PP
10,500 10,700 10,370(81)
INA
3132-345
17×118 15,000 15,000 20,380(81)
※5
3131-345
PCR96-02
（
A96-01PC
）
2x96
PCR
plate
ABI N801-0560 126×85 PP C
ー ー
Plate center
14,000
10,740
（
49
）
Plate side
15,340
（
70
）
When centrifuging at 15,000rpm, set temperature should not exceed 20℃.
Tube strength may be degraded under some use conditions, such as solvent, set temperature and operation
frequency, which can cause damage to the tube. Perform a trial run under actual operating conditions before use
and verify that tubes are in good condition with no cracks or damage.
When centrifuging at 15,000rpm, set temperature should not exceed 10℃.
Tube strength may be degraded under some use conditions, such as solvent, set temperature and operation
frequency, which can cause damage to the tube. Perform a trial run under actual operating conditions before use
and verify that tubes are in good condition with no cracks or damage.
When centrifuging at 15,000rpm, set temperature should not exceed 15℃.
Tube strength may be degraded under some use conditions, such as solvent, set temperature, manufacturer
outside recommendation and operation frequency, which can cause damage to the tube. Perform a trial run
under actual operating conditions before use and verify that tubes are in good condition with no cracks or
damage.
List of Applicable Tubes
②
※5
※6
※7