13
PREPARATION BEFORE USE
PREPARATION BEFORE USE
INSTALLING THE INSTRUMENT
CAUTIONS
• Be careful not to damage the chart window or stain it with fingerprints,
dust or other contaminants.
The reliability of the measurement result may be lowered.
• Tighten the screws for the support metal fixture securely so they can-
not be loosened. If the screw becomes loosened, the instrument may
fall and cause damage and/or injury.
• To remove the support metal fixture, ask your service personnel. If the
instrument is not installed along a wall, it may fall and cause injury.
NOTES
On the chart window, there is sometimes noticeably unevenness on the back-
ground due to interfering light. To prevent sunlight or interfering light from com-
ing in contact with the chart window directly, change the installation location or
the direction of the instrument.
To Next Page
Loading...
