61
BEFORE REQUESTING SERVICE
* When the errors occur frequently, contact your dealer or your local TOPCON office (listed on the back
cover).
"Fail to execute chart software with selected
chart type. Please select different chart type.
(Error Code 401)"
This message is displayed when the MC-4S cannot rec-
ognize the chart type changed by the setting.
Restart the CV system.
If the instrument does not reset, select a chart type
again or reinstall the software.
"IDS_CHART_LANG_TYPE_ERR (Error
Code 501)"
This message is displayed when the language that is
not usable in the MC-4S software is set in the CV soft-
ware.
The MC-4S software starts in the English mode. Use
the software as it is.
"Fail to save chart software configurations.
The changed parameters are canceled.
(Error Code 701)"
This message is displayed when the setting file of the
MC-4S cannot be accessed after exiting the setting.
Restart the CV system and change the setting again.
When the instrument is not reset, ask your local TOP-
CON office to repair it.
Error message Remedial measure
To Next Page
Loading...
