6
CAUTIONS
Preventing Electric Shock and Fire.
Set the test distance of the instrument correctly.
[The reliability of the measurement result may be lowered.]
Be careful not to damage the chart window or stain it with fingerprints, dust or other contaminants.
[The reliability of the measurement result may be lowered.]
Electromagnetic Compatibility (EMC)
This instrument has been tested (with 100V/230V) and found to comply with IEC60601-1-2 Ed.3.0:
2007.
This instrument radiates radio frequency energy within standard and may affect other devices in the
vicinity.
If you have discovered that turning on/off the instrument affects other devices, we recommend you
change its position, keep a proper distance from other devices, or plug it into a different outlet. Please
consult the dealer from whom you purchased the instrument if you have any additional questions.
Connect devices complying with UL60950/UL60950-1, UL60601-1 or IEC60950/ IEC60950-1 to the
MC-4S. Ask the authorized Topcon representative service engineer to connect the device.
To Next Page
Loading...
Need help?
General
