Topcon RL-SV2S User Manual

7. Applied Operation and Setting of Various Functions
32
5 Press the keys to increase or decrease the value of the digit.
6 Press the key to confirm the value.
7 When setting the grade for the Y axis, press the key. The Y axis display will start
flashing.
Set up the grade in the same manner as the X axis.
$
• To reset the grade value while setting, press the and keys simultaneously before
proceeding to step 5.
• To set with the RC-60, check the transmission and reception display.

Topcon RL-SV2S Specifications

General

Brand	Topcon
Model	RL-SV2S
Category	Laser Level
Language	English