Toptech MultiLoad II EXL User Manual

CHAPTER 5– CONNECTING FIELD DEVICES TO THE I/O BOARD
41 MultiLoad II/ RCU II Explosion Proof Lite (EXL) Installation Guide - Part # 6070
MultiLoad II Additive Wiring: Outputs
L
N
15A
I/O DIGITAL/
ANALOG
I/O 2 METER
METER 0 METER 1
PORT 1
PORT 3
PORT 2/
PORT 0.OUT
PORT 0.IN/
LINE.IN
PORT 0
S
1
S
2
S
3
S
4
+
L
N
S
#1
+
L
N
S
#2
+
L
N
S
#3
+
L
N
S
#4
IO_DA ONLY!
L
N
PORT 1.OUT
PORT 1.IN/
LINE.IN
IN 10
✓
OUT 9
✓
IN 8
✓
OUT 7
✓
IN 6
✓
OUT 5
✓
IN 4
✓
OUT 3
✓
IN 2
OUT 1
PORT 2
IO_DA TB1
PORT 0
PORT 1
PORT 3
PORT 8
PORT 0 OUT 5
✓
PORT 1 OUT 4
✓
PORT 2 OUT 3
PORT 3 OUT 2
✓
LINE IN 1
✓
IO_2M TB3
PORT 0 OUT 5
✓
PORT 1 OUT 4
✓
PORT 2 OUT 3
PORT 3 OUT 2
✓
LINE IN 1
✓
IO_2M TB2
PORT 3
PORT 2.OUT/
PORT 2.IN/
LINE.IN
PORT 3.OUT
PORT 3.OUT
PORT 3.IN
Output
Port
Input
Port
Injector #1 0 7
Injector #2 1 6
Injector #3 2 5
Injector #4 3 4
Note: The output port that is selected will dictate which port is used for the additive input. For example, if Port 0 is selected as the FCM Port#, the
output will be on port 0 and the corresponding input will be at port 7. See Table above for possible port assignments.

Toptech MultiLoad II EXL Specifications

General

Brand	Toptech
Model	MultiLoad II EXL
Category	Controller
Language	English