Toptech MultiLoad II EXL User Manual

CHAPTER 6– CONFIGURATIONS
62 MultiLoad II/ RCU II Explosion Proof Lite (EXL) Installation Guide - Part # 6070
Using this same screen as an example, the Processing Mode line is selected and Enter is pressed; use
the Next or Prev keys to toggle between the values ENABLED and DISABLED, as shown below. You
must then press Enter to accept the desired choice.
MultiLoad II/ RCU II Preliminary Configuration
1) Power-on the MultiLoad II/ RCU II.
2) When the MultiLoad II is first powered-on, the card–in screen appears, indicating Operating Mode.
An RCU II may initially display “System Unavailable” because it is unconnected to a host system.
RCU GENERAL SETUP
RCU Address: 123█
Card Reader: DISABLD
Processing Mode: Remote
Swing Arn Secondary: DISABLD
Terminal Name: Toptech Terminal
Security Accounts
Next Prev Exit Enter
RCU GENERAL SETUP
RCU Address: 123
Card Reader: DISABLD
Processing Mode: Remote
Swing Arm Secondary: DISABLD
Terminal Name: Toptech Terminal
Security Accounts
Enter Exit

Toptech MultiLoad II EXL Specifications

General

Brand	Toptech
Model	MultiLoad II EXL
Category	Controller
Language	English