Toptica Digilock 110 User Manual

4. DigiLock 110 Hardware Installation
Page 11
Status: 5.12.17
4 DigiLock 110 Hardware Installation
The DigiLock 110 module is designed as a plug in module for the TOPTICA DC 100 or DC 110 supply rack.
Before installation, switch off the laser and all other modules and disconnect the supply rack from the
mains supply.
The DigiLock 110 can be plugged into any slot of a 19’’ or 12’’ rack, except the one reserved for the
DC 110/Mon on the right.
Figure 5 DigiLock 110 installed in Supply Rack DC 110

Toptica Digilock 110 Specifications

General

Brand	Toptica
Model	Digilock 110
Category	Controller
Language	English