NUMBER OF CYCLES STA 1
01 Cycles/Operating Day
Select Number of Cycles
Note: Selecting 0 cycles will prevent the station from operating
during automatic watering operations.
2. The number of watering cycles per watering day is set to 1 by
default. To adjust the number between 0 – 20 cycles per operating
day, turn the Lower Line knob.
1. Turn the Upper Line knob to select Number of Cycles.
Set Soak Time
SET SOAK TIME STA 01
30 Minutes
Soak Time is an adjustable delay period that occurs between station
watering cycles to help promote deeper rooting, and to avoid pooling,
runoff and soil erosion. Soak Time is adjustable from 0–480 minutes in
10-minute increments.
2. The default Soak Time is 30 minutes. To adjust the soak time,
turn the Lower Line knob (00–480 minutes).
1. Turn the Upper Line knob to select Set Soak Time.
Note: The Soak Time is actually the minimum delay that can
occur before the station can run again. The actual delay period
may be longer due to the programming variables of other stations
assigned to the same watering program.
To Next Page
Loading...
